With PixelWifiOverlay2022 in factory build, the overlays can be loaded
properly. Remove PixelWifiOverlay2022 and only add for normal build.

Test: overlays can be read properly in both normal and factory build
Bug: 228415213
Change-Id: I1ac9d8c020c6030e8a6f9759ae761e342adc956f

Bug: 219870109
Signed-off-by: samou <samou@google.com>
Change-Id: I45b40c4f2f1942d7246d5dbc5fdb237a6ecc571c

Bug: 229716695
Bug: 224573604
Test: build and test fingerprint on device.
Change-Id: I8e3945bc8c99aae024f0304912419ce0d2820de3

Add primary display LHBM frames to reach peak brightness property.

Bug: 224573604
Test: perfetto
Change-Id: I55b85dff319fa95be6ee33c7286eca1c0a042407

Driver actually does not support 6Ghz softAp at
current version. Hence, disable it

Bug: 231384422
Test: SoftAp can be enabled
Change-Id: I5433e05dd3cabb3f345c442522f9870a979939c6

In P22 (Pro), there is no scaling_min_compute_freq (b/228921300) and under STREAMING_STANDARD setting GPU min frequency is 302000 which is smaller than scaling_min_compute_freq 471000 on P21 (Whi).

In addition, on Pro GPU we expect 25~30% slow down in the same frequency compared to Whi.

To boost the performance of GPU for shots on Pro, we add a new powerhint mode GCA_CAMERA_SHOT_GPU_EXTREME which raises the GPU frequency to the maximum.

Bug: 230289913.

Test: Pushed to local C10 (EVT1.0, go/ab/8471717) and test with cl/444178649 (trace: https://ui.perfetto.dev/#!/?s=23af98f7bc1729faefb9df2c6890566d48111bc957592a7c5ffbdad87c3d2f2d)
Change-Id: Ib77bddbdac32e689120c513f38029be9eab96449

Bug: 230433240
Test: verify gnss pps time pass
Change-Id: I49f82c17e31c8face3ce4ac943d59409562771ba

- Changes
New iteration of C10 MIX 103 for DF Merge
Full volume curve is integrated with LinkLaw for stereo playback
Reduced Sharpness of speech

CTS Validated
MPS validated w/ all stream paths, concurrencies, configurations w/ Waves Console on build:
TD1A.220406.001 (8410366)

Bug: 203817007
Test: 203817007#comment13, 203817007#comment20

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ib95ccb669c8fd5369599bd530aeeb64197d18119

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/18030213



Change-Id: I5a6d6fecdb736f83f6c24f5002e0fe45c02625eb
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

set config_wifiLinkLayerRadioStatsAggregationEnabled to true
to enable radio stats aggregation logic.

Bug: 211890916
Test: atest com.android.server.wifi.WifiVendorHalTest
Test: Manual - Dump the link layer stats and validated the results.
Change-Id: I8e5b86a917daa70d91de16b7f0a65e935e23b888

update default calibration
update japan specific calibration
use japan specific calibration

Bug: 229426438
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: Ifabe90d0b1361c64b588e032baeec49cc2184e7e

In previoues mechanism, p2p channel only can raise on same channel
while STA connected to 2.4GHz band. However, if device support DBS
mode, we should allow p2p to raise on 5GHz band for 230423673 higher
performance.

Bug: 230423673
Test: connect STA to 2.4GHz and verified that p2p is able to come up in
5GHz DBS mode.

Change-Id: Ibe996b9d54106734492b4ea2f7b816c3c8e52dbf

New thermal engine uses ODPM data. Since ravenclaw might not have
proper ODPM data, it can result in boot failures.

Bug: 230031671
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Id6ca70f22c841aea7a622304e0c757c93e7f55e2

Bug: 206337456
Test: Manual
Change-Id: I71daca44b4fe575b7039d4fabceaec73a75d80ee

High blocking zone: > 50,000 Lux and UI normal brightness 100%. Lock 60Hz

Bug: 222637975
Test: manual test
Change-Id: Iabd0409c3989cf0000030d93f70c8715eca4174a

Remove power rails from the thermal configuration for cloudripper.

Bug: 230031671
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Id37dbb99745c5cfbd7db9bcaf87241f39c5bf465

Bug: 210920670
Test: build
Change-Id: I3ced2400b22f3e18c73df46a1b0a6788e9267cb8

Bug: 223689835
Test: Boot and check values
Change-Id: Ia8f258432f289fa1cc74756cd7fc1b46bbd24806

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17957066



Change-Id: I2e54d5dc8eab5a43e73c418dc63623fff3c3354c
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 229350721
Test: UDFPS with stress
Change-Id: Iae2c76409188c388e9ff30c5951bdb3e9118301a
Signed-off-by: Wei Wang <wvw@google.com>

Bug: 230301121
Test: Manual
Change-Id: I3b53cd94f970b9dfa5ad0ac0d8a23175671b47bc

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17889204



Change-Id: I837049f278e6892554a96c40a202c6aca5358a8b
Ignore-AOSP-First: this is an automerge
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 229710243
Test: make
Change-Id: I79beee03e8773bb7b3e1dbdd881ddaf6fdb24827

New version of thermal engine (Powerlink v2) uses ODPM data for
thermal mitigation. But proto devices does not support ODPM.
Currently we have disabled thermal mitigation for all A0 based
devices through a separate config, thermal_info_config_A0.json.
This change restricts using separate thermal config  only for the
proto devices and uses thermal_info_config.json for the rest.
Fix a format issue with qi-quiet sensor definition.

Bug: 196478280
Test: Build and boot on device. Check thermal config
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I0922e935cafe118f3437335e2a72b87aae6f6009

FM table Changelist:

1. C10 HA NB/WB/SWB: fine tuning for EVT1.1
2. C10 HA NB/WB/SWB: FFP parameter update (enable)

Bug: 216258666
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ia4dcb8dd19d4aaf7fa4150a3cdacb9d455994ac6

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17856403



Change-Id: Ie07acb2eb11d7f43d05064c10a9394ef496b3fb3
Ignore-AOSP-First: this is an automerge
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 204271052
Test: voip + speaker mode

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I6aa0da65a1b1faa8be26ae8eb77a01b14d277666

update new boost uclamp value since we update
cpu capacity

Bug: 224649226
Signed-off-by: Taeju Park <taeju@google.com>
Change-Id: I49b38af1000ecb750acf94807547670941881b31

Update virtual-skin, virtual-skin-charge and cellular-emergency
sensors to 0.5 version coefficients.
Added "Version" field for virtual-skin node for identifying the
version of coefficients.

Bug: 229418131, 227477863
Test: Build and boot on device. Check virtual-skin readings
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I709fa1dfa5304416335bba1a7cb21a267e00c744

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17868107



Change-Id: I800c50d796a565233d0f9ab598a554e300c66ce7
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 178016953
Test: build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: If3770c4de98cbbd2f36cc7401d9ac284473c10d4

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17782663



Change-Id: I941c63cc5aeda856fedf6980c3db6cc2ee63c7b6
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

[P10/C10]

Phasing out config_roundedCornerMultipleRadius config from device
overlay package.

Bug: 224688507

Test: Build ROM and pass presubmit test
Change-Id: I325157ca5163d9c429724000be73c07728fbdc45

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17822305



Change-Id: I5c52334d71d53d3ca794cb31dea5ab10e3b120ea
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

add potential paths for i2c peripheral devices
sine we enable parallel module loading

Test: without error log on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I2afcf5d9255cd821a3bb9136d032b82782f396b3

Since the behaviors of Wifi/LTE coex avoidance for GPS L1 between C10 and P10 are difference, we need two independent overlay for C10 and P10.
For ravenclaw and cloudripper, they follow the overlay of C10 since they are only for developing purpose.

Bug: 228415213
Test: Overlay config can be read correctly.
Change-Id: I4323682686d8f83b584f2a56f01ebe8ea831cb43

Bug: 196478280
Test: run burn8 and manhattan
Change-Id: I447fa5bc452f413f65c46c235a5a3692b628586b

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17004534



Change-Id: Id4117c90593d2b9c00202d602255c62040b3f2fc
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Add Adpf Profiles:
1. REFRESH_120FPS
2. REFRESH_90FPS
3. REFRESH_60FPS
4. UiHighBoostWithoutPid
5. UiLowBoostWithoutPid
6. UiLowNoneBoost

Bug: 202158746
Test: boot to home

Change-Id: Ia6b48077dad9f9cf6e10eebcd06e080ae07f75d7

High throttling was observed on BIG cores resulting in device
sluggishness when the skin temperature hit LIGHT severity.
Current Tj control temp is set to 75 degC when LIGHT severity
is set for A0 based devices. This change is to increase the
Tj control temperature to 80 degC, same as B0 soc.

Bug: 229682004
Test: Build and boot on device. Check Tj control temperature
setting at LIGHT severity
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I67219937f89a9edec6fcf6083f4814d29ef600f2