Bug: 228943442
Test: manually
Change-Id: Ib3ca868ce4d3eebe7c9a5f9e33ceab3f9a9b9a41

Test: manual enable AOD and verify quick pick up gesture
Bug: 232717890
Change-Id: I5ae6f871168368e351a64a9f4337c83d14f4ecca

For devices with ODPM support only.
Bug: 203105544
Test: dumpsys activity -a

Change-Id: I1c841edbbcea6cd37e1495abd95a9b55ead5babc

Bug: 206337456
Test: Manual
Change-Id: I6c38ac3f62816f20315a6df380b657369aba3496

AAC-VBR is more prefered than AAC-CBR for A2DP playback.

Bug: 200101304
Bug: 229939538
Test: dumpsys bluetooth_manager
Change-Id: I8930fdf383a4bbe481371b4aa4379f554bb9bd15

Bug: 206337456
Test: Manual
Change-Id: I71daca44b4fe575b7039d4fabceaec73a75d80ee

Bug: 230301121
Test: Manual
Change-Id: I3b53cd94f970b9dfa5ad0ac0d8a23175671b47bc

Bug: 229710243
Test: make
Change-Id: I79beee03e8773bb7b3e1dbdd881ddaf6fdb24827

Bug: 204271052
Test: voip + speaker mode

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I6aa0da65a1b1faa8be26ae8eb77a01b14d277666

Bug: 178016953
Test: build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: If3770c4de98cbbd2f36cc7401d9ac284473c10d4

[P10/C10]

Phasing out config_roundedCornerMultipleRadius config from device
overlay package.

Bug: 224688507

Test: Build ROM and pass presubmit test
Change-Id: I325157ca5163d9c429724000be73c07728fbdc45

add potential paths for i2c peripheral devices
sine we enable parallel module loading

Test: without error log on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I2afcf5d9255cd821a3bb9136d032b82782f396b3

Add Adpf Profiles:
1. REFRESH_120FPS
2. REFRESH_90FPS
3. REFRESH_60FPS
4. UiHighBoostWithoutPid
5. UiLowBoostWithoutPid
6. UiLowNoneBoost

Bug: 202158746
Test: boot to home

Change-Id: Ia6b48077dad9f9cf6e10eebcd06e080ae07f75d7

Bug: 220121592
Test: make; Test with /vendor/bin/hw/ewp_tool
Change-Id: Ifdb05187b2f46403befb0b087cec9a146e00f8d4

Bug: 220121592
Test: Manual
Change-Id: I693379056b83c1dfc9345b3c2cb6d514d56986af

FM table Changelist:
1. P10 HA NB/WB/SWB : FFP parameter update(enable)
2. P10C10 HH NB/WB/SWB:
     (1) TX/RX fine tune for phone call quality
     (2) FFP parameter update (enable)
     (3) Enable Stereo spk in reserve2
3. P10C10 HE NB/WB/SWB:
    (1) Enable Stereo spk in reserve2
4. Align same parameter
     (1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
     (2) Handsfree RX to HCO RX

Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I50ec916280b96d631f1b656d6c1a0a96d324408f

This patch change owner of Bluetooth Timesync node to be Bluetooth to
allow Bluetooth HAL to read controller timestamp data via this node.

Bug: 226659256
Test: make
Change-Id: I70010daf45186235a48633355b5641b38597b2d6

Bring back old usage of status_bar_height, status_bar_height_portrait,
and status_bar_height_landscape by set the size containing cutout size.

Bug: 216782082
Test: make
Change-Id: Iff388639497a7955e363c3372d79ead35831bea5

Bug: 228742484
Test: manual
Change-Id: I9c97d2280ac50a0121fafd19a07592b03fd7e439

paths are changed when we enable parallel module loading and
reorder the initializtaion of devices.

Test: without avc denial on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ia94bccdf479262e96210c2eda4794c2708e56861

Bug: 227697054
Test: build pass and pts-audio
Change-Id: Iccb1953def4a9dffaf7b9e3dd512c68ae8a37c1e

Bug: 227697054
Test: build pass and pts-audio.
Change-Id: Id0384c7af546dec1a6237e3091a366a85d097d26

Modified the outdoor range mapping in
the outdoor auto-brightness curve.

Bug: 213251504
Test: check the default curve
Change-Id: I387e87f343ffe7af72fb965f2c7ea05eb85dfda1

Change touch procfs node ownership as system/system for dumpstate.

Bug: 199105131
Test: adb bugreport

Change-Id: Ibae5adfc22e661917618ac75b49bf50804892285

Bug: 227686549
Test: adb shell dumpsys thermalservice
Change-Id: I26e16c664ac95264d0d4cc943bb45627ff774d8c

Bug: 209592558
Test: adb shell dumpsys display | grep mStableDisplaySize
Change-Id: I76e835c695508295ad23538005bfa899efafbc01

Test: builds
Bug: 227427724
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: I9d5d5ad6a89ec2081993e02d00eebe5f3e678831

FM table Changelist:

C10P10
1. Parameter version update from 1.2.0 to 1.2.1
2. Headset BB
    Disable FFP for NB/WB to avoid low RLR issue (ST solution)
3. Headset TTY Full and HCO
    Set AEC_NUM_CH to be 0x0001 (Original is 0x0000) to make TX work properly.
4. BT
    Disable low latency mode on BTNB-NB and BTNB_NREC-NB to avoid TX clipping/distortion issue (ST solution)
5. HHNB/WB/SWB  NS parameter update for v603
6. HHNB/WB/SWB RX fune tuing for power consuming
7. Align same parameter
   (1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
   (2) Handsfree RX to HCO RX

Bug: 216258666
Test: b/216258666#comment19

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I583bda3772be7a667aed2b0c8fb34249b3223c9e

This reverts commit 9e36616a.

Reason for revert: disable offload DPE

Change-Id: Iecd1079a625094b322f672846c4cd1517c853827

Test: manual

Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ic796722d5186b2bb354315862892c5640252bf67

Modify name from sysfs_vendor_sched to proc_vendor_sched

Test: without avc denial
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ie8fdb9e6634fb160f5cea64883bead93be13d93e

Add touch module into the init.insmod.xxx.cfg, it will be loaded after
all common modules in late-init. So the touch module won't be loaded in
off-mode-charge.

Bug: 227269826
Bug: 226881266
Test: Verify pass that the touch module is not loaded in off-mode-charge.

Change-Id: I3f3153afb75355020e17534838410050f20f02b2

FM table Changelist:

C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB

Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199

- Create separate powerhint json files for a0 soc
- Add control/switchon powerhints for all IPs
- Change thermal severity level to LIGHT
- Update trip temps as per policy

Bug: 194509203
Test: Build and boot on device. Check change of trip temperatures
after the thermal severity of LIGHT
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ibd19ea16d0fee25dec801b287e1eab05699a8d7f

Bug: 215662726
Test: n/a
Change-Id: I1346de62a2e1425250583d7bc1365ffa72353ee6

Add cold temperature policy to combat sharp SOC% drop

Bug: 223420221
Test: Local peak current shock test at cold temperature
Signed-off-by: George Lee <geolee@google.com>
Change-Id: If1db429a6c6c181735af001a72372f63a59d01c4

There is no swiotlb usage so we can append noforce to
remove 2MB reserved memory.

Bug: 226578178
Test: check total memory and io_tlb_nslabs
Signed-off-by: Martin Liu <liumartin@google.com>
Change-Id: I746e8a1d18d78243bfe6a0b7549d5cf09cc4e227

Due to b/214429812, QURGENT currently is not working properly, and cause
easily see EBUF full when capture on GCA. Temporary increase MIF clock to
mitigate memory interface congestion. We should revert this when
b/214429812 fixed.

Bug: 223734867
Test: P22 GCA capture
Change-Id: I0cc16d5bd83cb23462147c44547077665bc1dc73

Test: Spatialized audio (including headtracking) with Pixel Buds and
multichannel mp4 file playback

Change-Id: I4f216aff07c25f80337ea07470983c4ae1e48efb

Modify the path of vendor_sched nodes

Test: powerhal work normally
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I0f499fac276fbdd3bf965bdd8c81bc4c4e7f48c4