Change the value to wait on the get session state and start command on
SE side to an optimal value after tuning

Bug: 237644730
Test: see b/237644730
Change-Id: I8ae99a1d85df55cc2ba8ab372c8879a7abdb8eb3

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19673833



Change-Id: I015bf4e5657c2ff0ef33bcf8a097915878a23615
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 243005982
Change-Id: I7b6c5cf0a62e3f7b8a459adc94501313e11d648a
Signed-off-by: Cyan Hsieh <cyanhsieh@google.com>

The correct path should be under /data,
or it is not writable.

wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.

Bug: 238601241
Test: create a group and check this group is persisted
      after reboot
Change-Id: I6f471aed60b56862ba9a8b0bb12d50ef6305faba

Allow these devices to send CPU hints to PowerHAL from SF to reduce
drops and save power.

Bug: 195990840

Test: manual
Change-Id: Idb7dad41852c71bff9b3c63d2d75849128288080
(cherry picked from commit 2dd1a62c)

DroidMonitor-triggered revert due to breakage - https://android-build.googleplex.com/builds/quarterdeck?branch=git_tm-qpr-dev&target=aosp_felix-userdebug&lkgb=8982522&lkbb=8982848&fkbb=8982848
BUG: b/243544635

This reverts commit 09c7a1c1.

Change-Id: Ib4b9b99d709f9a169fd1f3f081545c9220271605

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19674193



Change-Id: I10f3a3329971fe23b45ae5f7432c44f7ec30039b
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

This reverts commit 7e2cc1eb.

Reason for revert: Move throttling back to userspace
Bug: 239887528
Signed-off-by: George Lee <geolee@google.com>

Change-Id: I4ef3851a7163e50ed95862ba99330046634e032c

The correct path should be under /data,
or it is not writable.

wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.

Bug: 238601241
Test: create a group and check this group is persisted
      after reboot
Change-Id: I803badb16c67aba741b0804485a714bd5b179223

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19698597



Change-Id: Ie5adb08903c2016ce8a6774968decd3240235b3a
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

- Separate thermal config for charger mode and remove the unused thermal
throttling.
- Move charger pixel-thermal-symlink from common to project folder
to prevent the GKI version dependencies from blocking init.

Bug: 240897207
Test: usbc overheating protection and charging throttling worked
properly in charger.

Change-Id: I0ba3dabcc8c0c74e7e9334bc04a6fac875ac6b6c

Update for JP SAR values.

Bug: 233569849
Test: visual
Change-Id: I525ecb9f8b7ecce407db1e00f2dbaf7919b742af

Bug: 241312961
Test: Build
Change-Id: I5fbdc1063d2ac0c468d2a8c5b00293adac7d4179
Signed-off-by: Wei Wang <wvw@google.com>

Adjust the latency for BLE audio and others for av sync result.

Bug: 241898786
Test: Play AV sync video
Change-Id: I3ed43eac0b2e3a4d7ca9e8c8003654d3b0ba4e3a

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19565331



Change-Id: I284b9ae968d186efe906521672dbd9a88c9affcb
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 237110906
Test: Manual, verify build artifacts
Signed-off-by: achigoliu <achigoliu@google.com>
Change-Id: I3438cdf9066d306bcc1e6ab7354fab31152345a3
Merged-In: I1ef786ec0d909efce1899eb2003a88750af64af7

Instead of using hard-coded GPU freq, tune
DVFS period instead.

Test: Boot
Bug: 239887528
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I53415fb5c5390adace99b593495c6388b3232cd0

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19535136



Change-Id: Ie1223354a4b74590fe64e6ec94c107202fe98655
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 241526192
Test: confirm config is correct
Change-Id: I89aacf0659a9205665d5017f5f0bc25b2322698c

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19499321



Change-Id: Id4d0958bb63d5ccc23400c7a672839a9db2c5360
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 240743392
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I53156f61f3cb3e00be888ab29079babc4c12a7e8

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19516992



Change-Id: Ib9d3d876011b778639c6cf8cf5d297efb3da172d
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

* set BtBqrEventMaskOverride value to 262238 in bt_vendor_overlay.conf
  to disable firmware BTRT logging.

Bug: 237906721
Test: Manually
Change-Id: Ic509d750dcbbd8089df73c454d29f40bfe433716

Bug: 239658601
Test: vts-tradefed run vts -m vts_treble_vintf_vendor_test
Change-Id: I3eb04d4d9d6f5cfcd3cbbc37d6712114d520cfea

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19394176



Change-Id: Ib40d516935240a2ac56cb92cb16a8b61f2a2d8ad
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Test: manual - check cpu frequency is set correctly when triggering
powerhints.

Bug: 239625337
Change-Id: I74651043ad6d84fe3a63627ce6ad0dcc7f38860a

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19415708



Change-Id: I9581e48757ff6362cb6efbd6fe5476f02a0a2f9f
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 209525694
Signed-off-by: Sam Ou <samou@google.com>
Change-Id: Ie685e86feeb0ed3719b5cdebccd0a2218e2a2a6d
(cherry picked from commit 8d5dc506)

This is covered by parent projects.

Bug: 232461104
Test: Ensure Adaptive Charging/Battery health flags works as expected
Change-Id: Ifdd0f70ccd69f9c239c7c70ac43db5fd3631be42
Merged-In: Ifdd0f70ccd69f9c239c7c70ac43db5fd3631be42

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19429533



Change-Id: I2d47bf24339dfa268fd5974bd497688f224eaa22
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

So that the mm conversion is less than 1.

Also update missing config auth_ripple_alpha_in_duration
which should have been migrated to be 0 since the device
supports UDFPS.

Test: manual
Bug: 237311757
Change-Id: Ia0ba3145250ea16e58803651d77471f9c701b444

Bug: 236781877
Test: PtsUiBench
Change-Id: I0f1cbf5249d711ccba15a8f17161928d0ec607d9
Merged-In: I0f1cbf5249d711ccba15a8f17161928d0ec607d9

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19375854



Change-Id: I0571a7b95ea956cec51fc351aa37822e9dd533a3
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

1. HA Generic/TMOUS AMS fine tuning for DT
2. HA Generic/TMOUS BVE fine tuning
3. HH TX TDC fine tuning
4. Align same parameter : Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX

Bug: 239784758
Test: Verified at b/239784758#comment4
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Icaea25d152cdb9dadac04714b14b184ef918543b

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19378361



Change-Id: I8e30a1702aef3eb1c0099f785a71cc87a292a3a0
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19293024



Change-Id: I9fd455b810abbc182966abdf0b45cdac4916b989
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 239368308
Test: Camera CTS
Change-Id: I2d8159b2b9d7d0d427b291efea2030f66c6fb536

Change list:
  1. Merely one change:  change AGC param(rmsTav) from
     200 to 1000
Bug: 239342425
Test: Verified at b/239342425#comment9
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I90a16f61ac063833af413c4daf3703289d67ae06

Set the RF payload to 15 bytes and SWP payload to 30 bytes for
user-debug builds.

Bug: 213305069
Bug: 235492799
Test: manual
Change-Id: Iabcda7a253e77c0c9cce386ebb1a77dd83e13822

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/19326966



Change-Id: Icb65c3bac94011cceb1353b3a78dd82aece11501
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>