update default calibration
update japan specific calibration
use japan specific calibration

Bug: 229426438
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: Ifabe90d0b1361c64b588e032baeec49cc2184e7e

In previoues mechanism, p2p channel only can raise on same channel
while STA connected to 2.4GHz band. However, if device support DBS
mode, we should allow p2p to raise on 5GHz band for 230423673 higher
performance.

Bug: 230423673
Test: connect STA to 2.4GHz and verified that p2p is able to come up in
5GHz DBS mode.

Change-Id: Ibe996b9d54106734492b4ea2f7b816c3c8e52dbf

New thermal engine uses ODPM data. Since ravenclaw might not have
proper ODPM data, it can result in boot failures.

Bug: 230031671
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Id6ca70f22c841aea7a622304e0c757c93e7f55e2

High blocking zone: > 50,000 Lux and UI normal brightness 100%. Lock 60Hz

Bug: 222637975
Test: manual test
Change-Id: Iabd0409c3989cf0000030d93f70c8715eca4174a

Remove power rails from the thermal configuration for cloudripper.

Bug: 230031671
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Id37dbb99745c5cfbd7db9bcaf87241f39c5bf465

Bug: 210920670
Test: build
Change-Id: I3ced2400b22f3e18c73df46a1b0a6788e9267cb8

Bug: 223689835
Test: Boot and check values
Change-Id: Ia8f258432f289fa1cc74756cd7fc1b46bbd24806

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17957066



Change-Id: I2e54d5dc8eab5a43e73c418dc63623fff3c3354c
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 229350721
Test: UDFPS with stress
Change-Id: Iae2c76409188c388e9ff30c5951bdb3e9118301a
Signed-off-by: Wei Wang <wvw@google.com>

Bug: 230301121
Test: Manual
Change-Id: I3b53cd94f970b9dfa5ad0ac0d8a23175671b47bc

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17889204



Change-Id: I837049f278e6892554a96c40a202c6aca5358a8b
Ignore-AOSP-First: this is an automerge
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 229710243
Test: make
Change-Id: I79beee03e8773bb7b3e1dbdd881ddaf6fdb24827

New version of thermal engine (Powerlink v2) uses ODPM data for
thermal mitigation. But proto devices does not support ODPM.
Currently we have disabled thermal mitigation for all A0 based
devices through a separate config, thermal_info_config_A0.json.
This change restricts using separate thermal config  only for the
proto devices and uses thermal_info_config.json for the rest.
Fix a format issue with qi-quiet sensor definition.

Bug: 196478280
Test: Build and boot on device. Check thermal config
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I0922e935cafe118f3437335e2a72b87aae6f6009

FM table Changelist:

1. C10 HA NB/WB/SWB: fine tuning for EVT1.1
2. C10 HA NB/WB/SWB: FFP parameter update (enable)

Bug: 216258666
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ia4dcb8dd19d4aaf7fa4150a3cdacb9d455994ac6

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17856403



Change-Id: Ie07acb2eb11d7f43d05064c10a9394ef496b3fb3
Ignore-AOSP-First: this is an automerge
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 204271052
Test: voip + speaker mode

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I6aa0da65a1b1faa8be26ae8eb77a01b14d277666

update new boost uclamp value since we update
cpu capacity

Bug: 224649226
Signed-off-by: Taeju Park <taeju@google.com>
Change-Id: I49b38af1000ecb750acf94807547670941881b31

Update virtual-skin, virtual-skin-charge and cellular-emergency
sensors to 0.5 version coefficients.
Added "Version" field for virtual-skin node for identifying the
version of coefficients.

Bug: 229418131, 227477863
Test: Build and boot on device. Check virtual-skin readings
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I709fa1dfa5304416335bba1a7cb21a267e00c744

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17868107



Change-Id: I800c50d796a565233d0f9ab598a554e300c66ce7
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 178016953
Test: build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: If3770c4de98cbbd2f36cc7401d9ac284473c10d4

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17782663



Change-Id: I941c63cc5aeda856fedf6980c3db6cc2ee63c7b6
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

[P10/C10]

Phasing out config_roundedCornerMultipleRadius config from device
overlay package.

Bug: 224688507

Test: Build ROM and pass presubmit test
Change-Id: I325157ca5163d9c429724000be73c07728fbdc45

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17822305



Change-Id: I5c52334d71d53d3ca794cb31dea5ab10e3b120ea
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

add potential paths for i2c peripheral devices
sine we enable parallel module loading

Test: without error log on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I2afcf5d9255cd821a3bb9136d032b82782f396b3

Since the behaviors of Wifi/LTE coex avoidance for GPS L1 between C10 and P10 are difference, we need two independent overlay for C10 and P10.
For ravenclaw and cloudripper, they follow the overlay of C10 since they are only for developing purpose.

Bug: 228415213
Test: Overlay config can be read correctly.
Change-Id: I4323682686d8f83b584f2a56f01ebe8ea831cb43

Bug: 196478280
Test: run burn8 and manhattan
Change-Id: I447fa5bc452f413f65c46c235a5a3692b628586b

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17004534



Change-Id: Id4117c90593d2b9c00202d602255c62040b3f2fc
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Add Adpf Profiles:
1. REFRESH_120FPS
2. REFRESH_90FPS
3. REFRESH_60FPS
4. UiHighBoostWithoutPid
5. UiLowBoostWithoutPid
6. UiLowNoneBoost

Bug: 202158746
Test: boot to home

Change-Id: Ia6b48077dad9f9cf6e10eebcd06e080ae07f75d7

High throttling was observed on BIG cores resulting in device
sluggishness when the skin temperature hit LIGHT severity.
Current Tj control temp is set to 75 degC when LIGHT severity
is set for A0 based devices. This change is to increase the
Tj control temperature to 80 degC, same as B0 soc.

Bug: 229682004
Test: Build and boot on device. Check Tj control temperature
setting at LIGHT severity
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I67219937f89a9edec6fcf6083f4814d29ef600f2

Bug: 229727068
Test: Manual. Flash the device with the binary including this change and check adb logs. ERR_AUTO_PROVISIONING_DISABLED should not be printed.
Change-Id: I826f86c9943573d25ffeb1ac9761a29c03bf4cc9

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17607098



Change-Id: Id1098419eac267b83a3327710a7ca847e5067fd1
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17607096



Change-Id: Ib5467c9d13ea4430eb7dae4f09265718075096af
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

Bug: 220121592
Test: make; Test with /vendor/bin/hw/ewp_tool
Change-Id: Ifdb05187b2f46403befb0b087cec9a146e00f8d4

Bug: 220121592
Test: Manual
Change-Id: I693379056b83c1dfc9345b3c2cb6d514d56986af

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17773509



Change-Id: Iedaecae43aabf13880b9f331aa56d70ec9595ddd
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

FM table Changelist:
1. P10 HA NB/WB/SWB : FFP parameter update(enable)
2. P10C10 HH NB/WB/SWB:
     (1) TX/RX fine tune for phone call quality
     (2) FFP parameter update (enable)
     (3) Enable Stereo spk in reserve2
3. P10C10 HE NB/WB/SWB:
    (1) Enable Stereo spk in reserve2
4. Align same parameter
     (1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
     (2) Handsfree RX to HCO RX

Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I50ec916280b96d631f1b656d6c1a0a96d324408f

TEST:generated blobs from artifacts. Flashed device

BUG: 217478568
Change-Id: I8278e0044d5ece17037a06a4872c7361c34061b6

This reverts commit 9eb76e0f.

Reason for revert: a VC is merged in ag/17591379

Bug: 227407595
Change-Id: I3e778ed1df4f0ff0f02d2f16385b6c3f8ab508cd

Original change: https://googleplex-android-review.googlesource.com/c/device/google/pantah/+/17518863



Change-Id: I94482cab0595982d5b2e1a31f1985c412d4750c1
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

This patch change owner of Bluetooth Timesync node to be Bluetooth to
allow Bluetooth HAL to read controller timestamp data via this node.

Bug: 226659256
Test: make
Change-Id: I70010daf45186235a48633355b5641b38597b2d6