Bug: 207572845
Signed-off-by: Minchan Kim <minchan@google.com>
Change-Id: Id79fe41b0714d7aa654d7f88665d18c216364047

Bug: 213957442
Test: dumpsys android.hardware.power.stats.IPowerStats/default
Change-Id: Ic199fb87bc4679559f96fdf93197f39846fba023
Signed-off-by: Darren Hsu <darrenhsu@google.com>

Bug: 208375625
Test: check property
Change-Id: Ifbba1ddd530499d8d2f167e6c258a19a3ff69dd1

Test: check settings > system > gesture > one handed mode
Test: make
Bug: 213843981
Change-Id: I0004659b248dafacf903f66cb7f91f0731619581

Screen size : 1440x3120

Test: make and flash, enable debug mode and check visual
Bug: 199468172
Bug: 199467921
Bug: 203593020
Bug: 203592814
Change-Id: I0bc273452756a48608e3a7d08e9d19ee85fdcc6f

Bug: 194607800
Bug: 203042971
Test: pass A2DP playback manual test
Change-Id: I081dc9a7c16d0c6c73d278ad6d99b2704390ed2d

Screen size : 1080x2400

Test: make and enable debug
Bug: 199469413
Bug: 199469519
Change-Id: Ica99e6ce1d56f1e6eed1ccd136a566d5cd8a99e7

Enable below configs
 - CpLppeCancelDbhOnAgnssProvideLoc
 - CpLppeUseAgnssLocForEmptyDbh

Bug: 212516393
Test: build pass and confirm the configs are correct
Change-Id: I36f7276d769aa340de13c6c7bc3191376a97b58f

This reverts commit d5d0e9f3.

Reason for revert: <AOC FW that supports Spatial audio capture has been reverted>

Change-Id: I18286694da289215193c3e39ad71ea4a50392a69

Bug: 200293124
Test: build pass
Change-Id: I356376d8090da006b915e8cce9a71759ebb459e6
Signed-off-by: Carter Hsu <carterhsu@google.com>

- specific top speaker control doesn't merge becuase of pop sound issue
during turning on/off a speaker.

Bug: 207431993
Test: manual test (b/207431993#comment16)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ieca51d1f0ca238ff0d9112e8ede9d2eaad28ce98

Enable default 96k sample rate to fix the noise issue when enabling
96k speaker protection with 48k sample rate setting.

Bug: 206060532
Test: audio normal after device boot with speaker protection enabled
Change-Id: I28e58731b49b18ee14b9a1195c549e71a231d0ee
Signed-off-by: Robert Lee <lerobert@google.com>

Bug: 196235436
Test: wifi works fine on C10 device.
Change-Id: I0f4376e1777fb19057d16690c12eb552f4f295ff

Bug: 206576142
Test: dumpsys android.hardware.power.stats.IPowerStats/default
Change-Id: Ic2bc65ca8563ba48ec2ca3f3ac7777977103dfb5
Signed-off-by: Darren Hsu <darrenhsu@google.com>

Write the sysfs node to set touch sensitivity mode when the property
changes.

Bug: 199104397
Test: toggle the touch sensitivity button in Settings and check log.

Signed-off-by: davidycchen <davidycchen@google.com>
Change-Id: I1bd9258dcfa6897ee6febc5387c9504bcca1bb24

Route a debug system property to a persist system property to control
the touch driver attribute file glove_mode.

0: default sensitivity mode (default)
1: high sensitivity mode

Bug: 199105017
Test: manual test

Signed-off-by: Mason Wang <masonwang@google.com>
Change-Id: I30f91ebaf4ea2bb2d2db6090f035e0ba7ea37056

Bug: 211568122
Change-Id: I0819b3a7fdda22acfbd2df3cbf752713a8b6fd23

Bug: 211949266
Test: dumpsys android.hardware.power.stats.IPowerStats/default
Change-Id: I5ec7d3039fa222e7d137707bc0ff3cb38c19eb11
Signed-off-by: Darren Hsu <darrenhsu@google.com>

Bug: 208375625
Test: perfetto, check pane_idle
Change-Id: I3b23d831fd071cb52f80775fd6468e3006ca166d

Bug: 209687337
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I6e40321524af98441c8405a640c61ff3bc0a48cd

Use per display type color data.

Bug: 207034763
Change-Id: I087dde0a0253db90ea0736ad100c3273a1a24ee7

Create config.xml to support device suspend when screen off due to
p-sensor and enable adaptive brightness. A follow up patch may be
needed after tuning the auto brightness table.

Bug: 208528546
Test: brightness and adaptive brightness manual test
Change-Id: Ie559cbb2d656d4c5d46d28e200f44d27d2e037a6

Loads old cfg for proto and some of the evt.
The others loads default cfg.

Bug: 210755812
Test: manual
Change-Id: Ie892fed0d3e50ed2e1efb7f8ebc9d65bc5c5a63d

Bug: 211360517
Test: builds
Change-Id: I751ac47a52a5b34afa1c64a758fcf6d900947f19
Signed-off-by: Robert Lee <lerobert@google.com>

- sync tuning from final R4.
Sha1sum: e0f4816e759af04f41b6ea4716781b831e4dd0bb

Bug: 203817007
Test: manual audio test (203817007#comment5)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Id867442555bda91b440192b7a8898c0b6457037f

Bug: 198503843
Test: treehugger
Change-Id: Ia396897ce7c93d0cfa62cac9ba5072af3f6d24d7

Update init.cheetah.rc to make device able to check ro.boot.hardware.revision

Bug: 210755812
Test: Test with C10 proto, pass
Change-Id: Ibdbd43d2c8718d3fe6161f2bf190255daff350ae

Update init.panther.rc to make device able to check ro.boot.hardware.revision
Add libnfc-hal-st-proto1.conf to load st54j_conf_PROTO1.bin for proto1

BYPASS_INCLUSIVE_LANGUAGE_REASON=Keep the legacy name

Bug: 209525702
Test: Manually update .rc file, .conf file and st54j_conf_PROTO1.bin
to P10 proto1, then check the CFG version which is loaded

Change-Id: I33dd4d0dacb01bb544997913800a2c2ecc92b34e

Bug: 208498422
Test: build pass and confirm RF configs are correct
Change-Id: I265be39d8fb33c2497beb7803c857547428cbda8

Bug: 208497350
Test: build pass and confirm RF configs are correct
Change-Id: I877923ece325c73a9d32e682ca44a13d47182b2b

Add customized gps.xml for P22 project

Bug: 208725716
Test: build pass
Change-Id: I9464daf47668c033d17b3b56497999e1bbc3346c

Create config.xml to support device suspend when screen off due to
p-sensor and enable adapative brightness. Modify auto brightness
table to support 1000 nits in HBM mode.

Bug: 208358826
Bug: 199469930
Test: brightness and adaptive brightness manual test
Change-Id: I0831a7783f7a383fa86ddea180d76d9ef4ba9f97

Bug: 202809763
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I1a7f3aac11d4080f52e5e7ea777dde9b5bba39c2

Bug: 202809763
Bug: 202809919
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I017e20f4c1375f1c63ce234f98f9c3f12d873016

Bug: 208614761
Change-Id: I76727907af2618c752505e2f26148ec7dbd3d8d7

Bug: 205055813
Test: Manually update bin files and run
adb shell crus_sp_cal -d -s -a --device 5 --ambient 25 --num-speaker 2 --verbosity 7
 result: Everything is good

Change-Id: Iba25fcb3cc0252baf87df0b4424a73d3790ed379
Signed-off-by: Robert Lee <lerobert@google.com>

Disable udfps because all cloudripper boards do not
have fingerprint on it by default.

Bug: 208128856
Change-Id: If37f9854642bafe35ba1b1e16a18bbc9ac231d79

 - Set the "boost peak current limit" as 2.50A in default for
   both top & bot cirrus amps under "speaker" path(stereo
   speaker playback usecase).

Bug: 207431993
Test: manual test (b/207431993#comment7)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ie371225338a7470bf8d9bced46f68d16192758c3

Bug: 206566167
Test: dumpsys android.hardware.power.stats.IPowerStats/default
Change-Id: Iced632ccb403d82df609d4f2ac3a486f223feceb
Signed-off-by: Darren Hsu <darrenhsu@google.com>

Bug: 206533159
Test: YT music playback

Signed-off-by: juyuchen <juyuchen@google.com>
Change-Id: I58e247c95046908b99a02a8dd2ff08e1a5592f9c