No Pixel device support A2DP sink functionality.

Bug: 163050296
Test: A2DP related test.
Change-Id: I269220cf29451ea79362fc004fa073713f72fdb2

Change-Id: I4d12752ae5fb2829d6612647c8740c84967f5434

Change-Id: I9a15982efa28456b8340665ee628a4074bb0501e

As per systems team requirement, increase WSA MCS volume to 84.

Change-Id: If74246d0c5941b9d07fad5908f728be3af302bd6

For earpiece to be properly enumerated as a output device,
set valid and supported out_ channel mask.

Change-Id: Ic83b009956ff43567b3acbb186d0069b16e91e83

Adding stereo config channel support to usb surround sound proflle
to address CTS-V failure issue seen due to mismatch in channel mask
support for record usecase

Change-Id: Ib50511d2fa6df24b3aa4764553cd48726129b2c2

 * Doesn't work at all.

Change-Id: I8cd6341b240c3820dbbdef497e23e785b6ed99dc

Change-Id: Iee704477e21854f424565c4dfb76d50eeb66e819

Bring raw mixport back and drop "USB Device In" and "USB Headset In" from
"primary input" again.

This partially reverts commit 0b7df4e1.

Change-Id: I547518fbd6318dcb5fcb7c4ab85e8ad9da3d48ad

Change-Id: I990f5c195adf04a407489c677640ecf0e1f0f48a

Add format support for LC3 a2dp capture.

Change-Id: Ib6627d7f4cba0370b4ae300e10b8448f227517a2

This reverts commit 1d4c56e65865e10b3a36de5713557e0a7c552151.

Change-Id: Ie23807aecb01e89cfa3dbc31b0ba97793932da22

It will select "fast input" or "quad mic" as a compatible profile if
the parameter from recording app can't match the profile of
usb_surround_sound completely although connecting usb device.

Remove the usb device from the supported devices list of "fast input"
and "quad mic" for exact match.

Change-Id: Ie99886552082e99ac19193907b271131a2502d33

Add support for new LC3 format AUDIO_FORMAT_LC3
added for BLE support.

Change-Id: Ifd80fee833e05901544e2952781a460815661fb6

Remove dynamic attributes from APS config since it
is not supported.

Change-Id: I5ad81b67e7b6bb33e245a2620622f1e2e2a76506

Remove the following mixports because of the usage of unsupported
flags:
 * virtual_deep_buffer
 * uplink downlink input
 * voip record
 * Multiroute

Rewire USB Device In and USB Headset In to go through primary input,
since uplink downlink input does not exist anymore.

Also, remove raw mixport and its uses, since it can cause sound
popping.

Xiaomi overrides the default audio policy configuration from
vendor/etc/audio/sku_lahaina inside of AudioPolicyManager,
and uses vendor/etc/audio_policy_configuration_mi.xml.

Use the proper configuration, but keep copying it into the old
location, since our AudioPolicyManager only knows how to load
it from there.

This reverts commit f6bdf3e6.

Add compress recording configurations

CRs-Fixed: 2764160
Change-Id: I8e8b1f89d7f28d997342c5946d0a35111e941ec1

Routing primary output before voip_rx output will cause unexpected
RX/TX path suddenly and unmuted voice stream during when system
plays touch sound and switches path between handset and handsfree.

Bug: 152292858
Test: manual test in VoIP
Test: Regression test for VoIP(b/153276370) - pass

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ia60802ec887f0dfeaa0f93d151ba2f2c50e0d41d

* fix formatting
* cleanup unsupported paths
* use volume gain from LA.UM.9.1.r1-07300-SMxxx0.0

Add mixer controls for lito and atoll display ports on QRD
and speaker-safe display path in IDP and CDP.

Change-Id: Idfa9860248db51d0c147b4fee2df479e200ca81e
Signed-off-by: Prasad Kumpatla <nkumpat@codeaurora.org>

compress_offload_24 supports mp3/aac format

Bug: 132425237
Test: mp3 playback

Change-Id: I5742db45908f9d600cab0fef62badf447fc5c585
Signed-off-by: justinweng <justinweng@google.com>

Add VoIP Tx app type config for pcm and low-latency captures.

Bug: 133297310
Test: make a voip call

Change-Id: I5dd67167b7568fd08a7ae979b50417f2627dc7d9
Signed-off-by: justinweng <justinweng@google.com>

Remove Telephony Rx to make in call record use case through
different front end pcm device when sva enabled to solve concurrency
capture issue

Change-Id: I8a036423da689a4de9abe767a0b6a595b4e068f1

* Doesn't work at all.

Change-Id: I8cd6341b240c3820dbbdef497e23e785b6ed99dc

As FM app no longer uses app loopback,
2 instances of "primary input" is not needed

Change-Id: I7d5e941e916bdf221798ca89360e4751d4af322b

If two recording apps both select the primary input with
fast flag, second app will fail to start because the hal
doesn't support two inputs with the same use case if input
can't be reused since of the limit of primary input's max
open count.

Add the dedicated profile for “low-latency-record” to make
the first input can be reused if possible.

CRs-Fixed: 2550228
Change-Id: I233bd3eaf614b195df0a41402747f496d3a56b44

Usecase audio-record and audio-record-compress2 can both be
mapped to record_24 profile, if both the usecases are active,
when BT SCO mic is connected, due to no more available usecases
in audio hal, check inputs for device can fail for other input
profiles which support BT SCO mic.
This makes BT SCO mic connection to be rejected and phone call
can't route to BT.
Add the support for record_24 profile, so existing input handle
can be returned when checking inputs for BT SCO mic.

Change-Id: I63046ec87e35774474e08762fb6aa6275318b2c8

Backend config is missing for voice handset when TMU operator
is used due to which hw params is not set properly.
Add backend config for handset tmu operator sound device
in kona, lito and atoll variants.

[wight554: update interface to match SND_DEVICE_OUT_VOICE_HANDSET]

Change-Id: I199fa0bd33d682a129a4e77f25d32f615b175310
Signed-off-by: Volodymyr Zhdanov <wight554@gmail.com>

This DEFAULT adm_config profile will be used whenever a session is
in non-LPI with FFECNS disabled.
AFE will connect to ADM but will have none_topology.

Change-Id: I636667c376aa4309b67897e5dd162c4d318863f8

Add mixer controls for proxy ports.
Enable call screen mode support in audio_policy_config.

Change-Id: I88eb274e8b88d089da930a786f9ea8085955ae3b

Built-in mic and Built-In Back Mic aren't in supported devices
list of primary input, so record_24 is selected if without
connecting any headset, if there is more than 2 capture
concurrency, it will fail to open input for primary input when
connecting headset in AHAL.

Add built-in mic to primary input sources to reuse input to avoid
to open extra input stream in AHAL.

CRs-fixed: 2643298
Change-Id: I1e062520f7fb03ae97c88341dd58f77177dbe030