Bug: 217966931
Test: Verify Passpoint ANQP functionality and Passpoint association
Test: Connect to Passpoint, Open, WPA2, WPA3 networks and run traffic
Test: Regression test b/218404053 (Bug: TBD)

BYPASS_INCLUSIVE_LANGUAGE_REASON=Merged from Open source

ac1e3a7f0 Add QCA vendor MCC channel quota command and event
1d1e3184b Whitespace/coding style cleanup for QCA vendor attribute definitions
1646883f4 Vendor command to configure rate mask
2faaa193f Rename moderate latency level to XR latency level in vendor attributes
f9905f8d9 nl80211: Clear frequency information on leaving mesh
1f26a0a34 DPP: Use a 120 second timeout for GAS query
07e26b292 GAS server: Increase query timeout to 60 seconds for DPP
a6d157b6f DPP: Start a listen operation for GAS server if needed
da65e7136 nl80211: Add a handler for NL80211_CMD_FRAME_WAIT_CANCEL events
9aaf3e1d1 P2P: Update GO operating frequency after interface setup is completed
033ad6ffa DPP: Allow Configurator parameters to be provided during config exchange
d4961a775 GAS server: Asynchronous request handler comeback time indication
9a90aab12 DPP: Store Enrollee config request information
6751fb060 DPP: Make dpp_netrole_str() non-static
34575ad72 EAP-pwd: Fix the prefix in a debug message
e07000e74 nl80211: Partial support for radio_disable
33cb47cf0 DPP: Fix connection result reporting when using TCP
1822bd378 DPP: Testing capability for invalid Protocol Version in Network Intro
d7be74933 DPP3: PKEX over TCP
bdcccbc27 DPP: Change PKEX version configuration design
9d3f347a2 DPP3: Add PKEX initiator retries and fallback from v2 to v1 for hostapd
3f67ab587 DPP: Handle TX status events for broadcast DPP messages
802136299 DPP3: Start with PKEXv2 and fall back to v1
f32f99df1 P2P: Send response frame on channel where the request is received
b678a3aa3 Extend QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
fc4bc342e Replace "blacklist" with "denylist" in vendor interface definition
bc9fd8adc Replace "whitelist" with "allowlist" in vendor interface definition
ffe80cb8e wpa_supplicant: ap: Update comment
c76545033 The main branch is now used for v2.11 development
cff80b4f7 Preparations for v2.10 release
7a57eb315 Update copyright notices for the new year 2022
9b14aed90 crypto: Remove unused crypto_ec_point_solve_y_coord()
8c502336d EAP-pwd: Derive the y coordinate for PWE with own implementation
6c380f4c8 SAE: Derive the y coordinate for PWE with own implementation
8ebd8aacc SAE: Move sqrt() implementation into a helper function
41c7f3f20 Defined a driver interface for periodic TSF sync feature
5758d0929 Add a QCA vendor attribute to indicate ACS over EHT
7ffcbd08c Clear roam/BSS TM in progress flags for additional cases
16b5ea9e9 Reject authentication start during BSS TM requests
af6d4031d D-Bus: Fix build without CONFIG_INTERWORKING
58bbcfa31 OpenSSL: Update security level drop for TLS 1.0/1.1 with OpenSSL 3.0
682fce579 OpenSSL: Fix compressed form encoding for subjectPublicKey with 3.0
ff2eccbdf OpenSSL: Load legacy provider when needed for OpenSSL 3.0
ddcdd6286 OpenSSL: Clean up EVP_PKEY_get{0,1}_EC_KEY() use
384aa245e OpenSSL: Speed up crypto_ec_point_compute_y_sqr()
b26f5c0fe DPP: Remove dpp-listen radio work when stopping
3f8c83a65 SAE: Make sure BSS entry is available to determine RSNXE information
43f600a1f Add new vendor attributes to avoid coex unsafe frequencies
cab51021c DPP3: Update version capability indication for hostapd
bc24a8a09 Update supported channel width set (HT40) after channel switch
ff7e403f0 Fix channel switch wrapper when switching from HT to VHT/HE
5606ede12 Update ieee80211ac when channel switching
e6db1bc5d mesh: Make forwarding configurable
5ef9277d0 ACS/DFS: Support min_tx_power configuration
5530688b9 MBO: Fix the allowed range of mbo_assoc_disallow values
c8e4283f9 D-Bus: Interworking network selection
b44e19967 D-Bus: Interworking/Hotspot 2.0 credential operations
4262e6ca4 Move credential removal operations into helper functions
e232d9777 HS 2.0: Crypto engine support for creds
97607de5e D-Bus: Capture group ifname before switching to global P2P instance
36973aac2 SME: No need for OBSS scan if HT40 is disabled
7db757aac Revert "Extract BSS coex 40 MHz check into a separate function"
e480321f8 Revert "STA OBSS: Add check for overlapping BSSs"
b57273d06 DPP2: PKEXv2 core protocol changes
b21b31014 DPP: Testing functionality to omit Protocol Version from Peer Discovery
341e7cd66 DPP3: Verify version match during Network Introduction
f26fd5ee6 DPP3: Use Connector version instead of current version in Peer Discovery
0cfb72689 DPP3: Add version member to Connector
77ddd38b6 DPP3: Add build option for version 3 functionality
14ab4a816 Reject ap_vendor_elements if its length is odd
2c2bfebca Fix bool type values for setband
7dc7b8814 P2P: Remove 6 GHz channels from full scan if 6 GHz not enabled for P2P
147932add Add a QCA vendor attribute to indicate puncture pattern in ACS
0b853303a Update AKMP, cipher, PMF for driver-based SME while roaming
c8b94bc7b mesh: Enable 160 MHz bandwidth support for 6 GHz in IEEE 802.11s mesh
ab0af709d mesh: Enable MFP by default for 6 GHz 11s mesh
d10a01e22 mesh: Enable 80 MHz support for 11s mesh in 6 GHz
d6c5feb8c mesh: Change channel to frequency based lookup for starting mesh
b16b88acd RNR: Do not allow FILS Discovery and unsolicited Probe Response simultaneously
15f099ec7 RNR: Allow Probe Response frame for a colocated 6 GHz AP
f17f7ca4e RNR: Update Beacon frames for 6 GHz colocation
01efcc292 RNR: Addition in Beacon, Probe Response, and FILS Discovery frames
0c9457ee2 RNR: Additions for a 6 GHz AP
b2bbedcb2 RNR: Add co-located BSSes
a7c152d6b RNR: Add data from neighbor database
847f76760 RNR: Add configuration option
3db24e4ee RNR: Define element format
b389d88a7 Share a common error path for SET_NEIGHBOR control interface command
1b8eb3975 RNR: Add bss_parameters to the neighbor_db
9d0948ecc RNR: Short SSID assignment
8d881d942 Update AKMP and proto for driver-based SME while roaming
f969bd22d Add QCA vendor attribute to configure ARP/NS offload feature
8f4d7e8f0 OpenSSL: Fix build with OpenSSL 1.0.2
2086ae46b DPP: Replace dpp_bootstrap_key_der() with crypto_ec_key_get_subject_public_key()
e9f8f81a8 DPP: Use ECDH from crypto.h
4aed5668b OpenSSL: Clear the correct flag in crypto_ec_key_get_ecprivate_key()
bf161b660 Ignore CONFIG_WIFI_DISPLAY without CONFIG_P2P
b306a92df Fix compiler error on CONFIG_AP without CONFIG_P2P builds
726eda65f wolfSSL: Fix a link error when WPS NFC is disabled
b8402ab08 DPP: Use crypto_ec_key_get_subject_public_key() when possible
d51939f2c DPP: Move CSR routines to use crypto.h
d56352b55 DPP: Move dpp_pkcs7_certs() into crypto_pkcs7_get_certificates()
b89176fa6 DPP: Move debug print of EC key to crypto.h
87f2fb886 DPP: Remove direct call to OpenSSL in dpp_test_gen_invalid_key()
c88b7fcae DPP: Add crypto_ec_key_cmp() in crypto.h and use it
984faf963 DPP: Use crypto_ec_key_group() to compare EC key's group
f5334f9b5 DPP: Use crypto API for reconfig part
eac41656e DPP: Update connector signing to use crypto.h
da63d3099 DPP: Remove unused EVP_PKEY_CTX variable
4767de3a4 DPP: Use crypto.h for authentication computation
0d1d74107 DPP: Update PKEX part to use crypto.h API
50708770f DPP: Use crypto_ec_key_parse_priv() when possible
e294a73d0 DPP: Use crypto_ec_key_parse_pub() in dpp_get_subject_public_key()
9c1632908 DPP: Move dpp_set_pubkey_point_group() to crypto.h
e84b143e1 OpenSSL: Add Brainpool curves to crypto_ec_key_group()
c6f2103ca DPP: Replace dpp_get_pubkey_point() with crypto_ec_key_get_pubkey_point()
2d5772e69 DPP: Factorize conversion to ASN.1 ECPrivateKey
63bf3d25a OpenSSL: Mark crypto_ec_key_gen() key compressed
86cde01cb DPP: Move dpp_gen_keypair() to crypto
0517948d7 DPP: Replace EVP_PKEY by struct crypto_ec_key
cd0c1d256 OpenSSL: Use EVP_PKEY as struct crypto_ec_key
15275c53d Complete documentation in crypto.h
cb285e80c SAE: Fix sm->cur_pmksa assignment
aa5c4f932 Add QCA vendor attribute to configure priority of vendor scan
aca4d4963 Fix handling of complex configuration lines with mixed "" and #
0ae677c7b eloop: Extend overflow check in eloop_register_timeout() to cover usec
979f19716 WNM: Allow specifying dialog token for BSS transition request
3f6c02f29 Use pkg-config for libpcsclite linkage flags
e797959b8 systemd: Order wpa_supplicant after dbus
95bf9fc93 Remove extra slash from BIN/INC/LIBDIR defaults
5a4ae6e3a Replace "native" with a more specific description
2fb33ce4b wpa_supplicant: hostapd: Remove man-in-the-middle
2e122945f DPP2: Do not try to remove Controller TCP connection twice on error
5bac420e5 DPP2: Clean up Controller on hostapd interface removal
d8b3d0815 macsec_qca: Support macsec secy id getting from driver
08bdf4f90 proxyarp: Fix compilation with Hotspot 2.0 disabled
b0f457b61 SAE: Do not expire the current PMKSA cache entry
f332f6951 wpa_supplicant: Try all drivers by default
4775a5f82 Add support to reconfigure or flush PMKSA cache on interface enable
6f634b003 PMKSA: Make sure reauth time is not greater than expiration time
973f3e244 Fix hostapd segfault on WPS_CONFIG control interface command to non-WPS AP
9ef8491d9 Add TWT attribute to configure TWT related parameters
321dc403e Replace "dummy" with "stub" in crypto/random
95e140e20 Replace "dummy" with "stub" in NDIS driver interface
c53fa9225 Replace "dummy" with "stub" in EAP-TEAP testing
575dc1f3b Replace "dummy" with "stub" in preauth_test
ed5e1b722 Replace "dummy" with "stub" in comments/documentation
3955d2af7 Replace "dummy" with "stub" in wps_testing_dummy_cred
77dd71243 Replace "dummy" with "stub" in Authenticator group keys
fb1bae2a7 Replace "dummy" with "stub" in SAE
e69ea242a hostap: Remove unused driver enum values with "master" in them
7b50f2f04 Replace "sanity" with "validity"
891bb1305 P2P: Enforce SAE-H2E for P2P GO in 6 GHz
afcadbbf4 wpa_cli: Add support for SCS, MSCS, and DSCP commands
bcaa1ea08 HE: Disable HE in hostapd_set_freq_params() if driver does not support
fe1d743a1 Add QCA vendor attributes to indicate 320 MHz spectral scan capabilities
2b3e64a0f Update ciphers to address GTK renewal failures while roaming
9cf4bb0ef Vendor command to configure/trigger the roam events
dd3a2960a Add TWT vendor attribute to configure announce timeout value
afa0b9b6c P2P: Make p2p_check_pref_chan_no_recv() easier for static analyzers
857c4dfa8 Make get_mode() easier for static analyzers
9651deba5 Support vendor element configuration for AP mode from wpa_supplicant
d144b7f34 DSCP: Add support to send DSCP Policy Query frame
c903257fb DSCP: Parse WFA Capabilities element in (Re)Association Response frame
a4aae9f9b DSCP: Indicate DSCP Policy support in (Re)Association Request frame
d57456c1f DSCP: Allow DSCP Policy Response Action frame to be sent
2033e318e DSCP: Parsing and processing of DSCP Policy Request frames
fe2a44485 DSCP: DSCP policy capability configuration
8471d940e Move pmf_in_use() into a more generic file
41ec97cd0 HE: Use a random BSS Color if not defined in the config file
1518638b7 QCA vendor command to configure the parameters for monitor mode
8f7b2c898 Add attributes to support MBSSID multi groups notifications
a75fdcdcd Extend the roam reason codes in QCA vendor attribute
9ff0c8af5 Correct the documentation in enum qca_roam_reason
ce267f4da P2P: DFS offload for the autonomous GO
6ba665c5c Reserve QCA vendor sub command id 201
51d73d991 Add QCA vendor interface to configure background scan parameters
61c075761 EDMG: Validate pri channel lookup result before using it
a95144cf3 Add frequency to operating class determination for 5 GHz channel 144
e5173e8b1 P2P: Enable multiple channel widths for P2P in 6 GHz band
f725254cc P2P: Enhance determination of secondary offset to support 6 GHz channels
575a8e6ca P2P: Clone 6 GHz related parameters to new group interface config
f18433760 Add TWT attribute to send Responder PM Mode value to userspace
11a342775 Add time slice duty cycle attribute into QCA vendor command
d408e3d19 Update QCA mDNS Offload vendor command
2341585c3 ACS: Fix channel 100 frequency
ed369613f P2P: Align p2p_buf_add_pref_channel_list() prototype with definition
75a6d44a4 hostapd: Allow HT40 on 5 GHz channels 173 and 177
7dd2e2369 hostapd: Always allow HE AP with a 20 MHz channel width
9f2217c51 P2P: Consider p2p_no_go_freq for GO preferred frequency
882c53be5 P2P: Avoid integer overflow in channel
a58f7e61c Add QCA vendor interface to configure allowed bands for roaming
be81bbdc3 doc: Fix grammar in wpa_supplicant overview
362d9a49d utils: FreeBSD supports fdatasync(2)
9bd943410 nl80211: Fix send_mlme to use monitor interface only for AP interface
f02ac5140 HE: Option to disable HE ER SU in HE operation in AP mode
63f043f4f Generalize the function name as it is not dealing with only TX & RX params
3cdc6d381 mesh: Show peer connected time in the wpa_cli STA cmd output for Mesh mode
eddcd2753 Fix some compiler warnings on 32 bit platform
4c80937c7 nl80211: Reduce the number of nlctrl name resolution calls
cce33c7e7 openssl: Support private_key blob in PEM encoded PKCS#8 format
0030590fb Generate an event when a network is added or removed
f23861061 Add a --conf option to eapol_test.py
99c1789ab PASN: Fix ASAN error in ptksa_cache_add()
e2e9adc3d openssl: Disable padding after initializing the cipher suite
d265dd2d9 openssl: Remove deprecated functions from des_encrypt()
46b60299a wpa_supplicant: src: Replace Sane with Valid.
12388313a RADIUS client: Fix void-pointer-to-enum-cast warning
e433d06dd Allow MSCS support to be disabled for testing purposes
025f8ab52 SCS: Processing of SCS Response frames
b4e01ae92 Allow SCS supported to be disabled for testing purposes
c005283c4 SCS: Sending of SCS Request frames
445dbe2cd P2P: Do not stop Listen state if it is moving to correct channel
e99aaf706 Add QCA vendor attribute for TWT termination due to power save exit
a147951ee Add QCA vendor attribute indicating the spectral scan bandwidth
51f89565f Add QCA vendor interface to fetch thermal statistics from the driver
24774dcc2 P2P: Require PMF for P2P GO in the 6 GHz band
49442194c SAE: Derive H2E PT while reconnecting to same SSID also
ac79ed499 HE: Obtain correct AP mode capabilities for hw_mode with 6 GHz support
dfabf1e5c QCA vendor command for mDNS offload
1071f7539 DPP2: Fix channel 6 inclusion for chirping with non-2 GHz interfaces
84b3de809 TDLS: Support TDLS operations in HE mode for 6 GHz
1990ee7ee QCA vendor attributes to configure BTWT and Rx control frame to MultiBSS
f5f2985a2 Update TWT attribute to send TSF value in TWT setup command
b4f7506ff FILS: Flush external-PMKSA when connection fails without ERP keys
80bcd7ecd FILS: Flush PMKSA entries on FILS connection failure
914a2f518 SAE: Report authentication rejection over control interface
9557ba336 AP: Don't increment auth_transaction upon SAE authentication failure
84f6492ea Extend QCA vendor command for TSF to enable and disable auto report
7ef420058 QCA vendor attribute to configure BSS max idle support
ef83e0f90 QCA vendor attribute to use BSSID in Probe Request frame RA
e2ff06c91 Add channel load percentage attribute into QCA vendor command
ac6a0293d Add uplink delay attribute in QCA vendor command get_sta_info responses
84f894773 PTKSA: Fix a potential hostapd memory leak during reconfiguration
311091eb4 P2P: Use SAE+PMF for P2P connection in 6 GHz
f0cdacacb P2P: Allow connection on 6 GHz channels if requested
b36142a74 P2P: Add allow_6ghz parameter to control interface
f7d4f1cbe P2P: Add a mechanism for allowing 6 GHz channels in channel lists
6423c23e3 P2P: Allow 6 GHz channels to be included in the P2P_FIND operation
a06c7d50f P2P: Helper functions to check for WFD capability of a P2P device
eaf850867 P2P: Extend channel determination/validation to 6 GHz channels
9b50746f5 P2P: Introduce 6 GHz band capability bit in P2P Device Capability
9f901e65b WNM: Ignore SSID check for hidden SSID in transition candidates
525ec045f P2P: Use correct return type for has_channel()
09fb9b0cb DFS offload: Use hostapd_is_dfs_required() to check if DFS required
e8662e9d4 Use a helper function to remove struct wpa_bss_tmp_disallowed entries
ecaacb47b OCE: Remove AP from driver disallow list with sufficient AP RSSI
c25b50306 hostapd: Reject 40 MHz channel config if regulatory rules do not allow it
20a522b9e AP: Add user configuration for TWT responder role
9efed6684 Android: Pass the vendor events to $(BOARD_HOSTAPD_PRIVATE_LIB)
39a1d55b7 Add QCA vendor interface to transport CFR data using netlink events
da3335c92 QCA vendor attribute to configure keep alive data type
98f1259cd QCA vendor attribute to configure ER SU PPDU type
e2e2655ce FILS: Fix PMKID derivation for OKC
6abfb1418 Use estimated throughputs irrespective of RSSI delta for 6 GHz APs
5e1e4cceb Add QCA vendor attribute to enable/disable FT over DS
586afb8fa Add QCA interface to configure band specific RSSI thresholds for roaming
800e34550 Fix documentation for QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR
7d2302f87 Add EAPOL-4WAY-HS-COMPLETED indication to AP
1c5aa2579 Add EAPOL_TX command to extend ext_eapol_frame_io possibilities
7f0a2e422 Report EAPOL-RX events for testing purposes
04283cf36 Add REKEY_PTK to allow upper layer request to force PTK rekeying
82d8d631e Skip GTK rekeying request if rekeying already in process
de4d62dbc Add QCA vendor definitions for DFS radar history
46f897619 Prefer 6 GHz APs for connection in BSS selection
84008457e Add support to calculate estimated throughputs for HE rates
658b6a0b0 Add support to estimate throughput for VHT 160/80+80 MHz supporting APs
1d2118b50 Check local supported features for estimating BSS throughputs accurately
2950851ac Rename the Frame Control field subfield Order define to +HTC
11821ab3d Add QCA vendor interface to query usable channels
6ae0d78b8 Determine 6 GHz bandwidth in AP mode ACS using op_class parameter
0822de037 Add AP mode ACS support for the 6 GHz band
bef5eee4f Convert channel to frequency based selection for AP mode ACS
15742566f 6 GHz: Fix operating class in Supported Operating Classes element
79e8f0c16 hostapd: Update 160 MHz center freq calculation in 6 GHz
9c6b0a941 hostapd: Disable VHT/HE when WMM is not enabled
15b1831a2 nl80211: Map internal TDLS_PEER_* to NL80211_TDLS_PEER_*
742018f44 Add support to indicate TDLS peer's HE capability to driver
2be5777a9 Sync with mac80211-next.git include/uapi/linux/nl80211.h
1f2fbf41d Fix UPDATE_BEACON processing when disabled
b8d337c63 DPP2: Fix channel 6 inclusion for chirping with non-2 GHz interfaces
80d975695 DPP2: Get DPP Relay Controller context based on hostapd callback context
e63d45690 Add vendor reason code for TWT setup reject due to scan in progress
7d513b5b2 Add vendor hang reason code for tasklet/credit latency
a6cae954e Vendor command to configure concurrent STA connection policies
c2d7b027b DPP2: Close incomplete Relay connections
f91680c15 OpenSSL: Fix compilation for version < 1.1.0 without CONFIG_ECC
d675d3b15 Add helper functions for parsing RSNXE capabilities
663e190b7 SAE: Remove now unused password identifier argument from non-H2E case
79f87f473 PASN: Change PASN flows to use SAE H2E only
8c786e068 PASN: Derive KDK only when required
655edc19c Vendor attributes to configure broadcast TWT parameters
49ad86b0c Add vendor reason codes for TWT setup reject on roaming/channel switch
0bae16122 Set last_eapol_matches_bssid=1 on a roam+auth indication from driver
527be9ce7 SAE: Increment the Sc counter before generating each Confirm
47f51c8ba tests: Update SAE test vector to IEEE Std 802.11-2020
5f082c158 nl80211: Support larger number of MAC ACL entries
f1fc9cf74 nl80211: Fix the size of the maximum MAC ACL size
93576264b WPS: Share a single error handling path in wps_set_ie()
2445e18b6 tests: assoc+auth driver event
00bec7b5b tests: IEEE 802.1X and FORCE_UNAUTH state
e72e32253 hostapd: Enable WMM automatically when HE is configured
8ca330bd7 Flush pending control interface message for an interface to be removed
4a841a218 Fix WNM-Sleep Mode exit debug print of BIGTK
354f87e2e MSCS: Fix MSCS Response frame Status field parsing
b8673baea Add REGISTER_FRAME hostapd control interface command for testing purposes
60974eb3f Allow AP mode extended capabilities to be overridden
7365eb43e Make hostapd_config_fill() easier to auto indent
8ca09293e Simplify extended capability determination in AP mode
37306a004 PASN: Use a helper function to free radio work data
349e9eafb PASN: Mark pubkey/comeback arguments constant for frame construction
67014b3f7 PASN: Add support for comeback flow to wpa_supplicant
ab623ac75 PASN: Add support for comeback flow in AP mode
4ed10754e DPP: Fix GAS client error case handling in hostapd
3ae18d4bd EAP-SIM/AKA: Fix check for anonymous decorated identity
512d973cc DPP: Indicate authentication success on ConfReqRX if needed (hostapd)
6c8842f0e Fix full EAP authentication after PMKSA cache add failure
6bbbd9729 DPP2: Fix connection status result wait in hostapd
c0c74f0c6 Testing functionality for airtime policy
2f7789149 nl80211: Debug print error from airtime weight configuration
38fa5e657 More documentation for HE Spatial Reuse Parameter Set configuration
73d9891bd EAP-SIM/AKA peer: Support decorated anonymous identity prefix
7831b10a8 Introduce reason code for TWT teardown due to concurrency
eaeec4da2 PASN: Add support for deauthentication flow in station
4f436d537 nl80211: Allow sending Deauthentication frame with off channel for PASN
1ca1c3cfe AP: Handle deauthentication frame from PASN station
166e357e6 AP: Enable anti clogging handling code in PASN builds without SAE
6fe0d56e8 AP: Rename SAE anti clogging variables and functions
b86678633 PASN: For testing purposes allow to corrupt MIC
2efa60344 PASN: Encode the public key properly
cd0813763 PASN: Include PMKID in RSNE in PASN response from AP
da3ac9809 PASN: Fix setting frame and data lengths in AP mode PASN response
c733664be EAP peer: Make EAP-Success handling more robust against race conditions
72a17937c DPP: Add init/respond retries parameter configuration to hostapd
6ed0c212e TLS: Fix highest TLS version disabling with internal TLS client
57550cb27 DPP2: Use ASN.1 helper functions
626035bec TLS: Use ASN.1 helper functions
d4e1d76db X509: Use ASN.1 helper functions
173e7eede RSA: Use ASN.1 helper functions
72b0217ab PKCS: Use ASN.1 helper functions
a0541334a ASN.1: Validate DigestAlgorithmIdentifier parameters
94beb8e36 ASN.1: Fix AlgorithmInfo parsing for signatures
ee76493bb ASN.1: Reject invalid definite long form length values in DER encoding
3af75f23b ASN.1: Reject invalid extended tags in DER encoding
d6831a0e9 ASN.1: Explicitly validate constructed bit while parsing DER
b421a7cf2 ASN.1: Use the helper functions for recognizing tags and debug prints
9a990e8c4 ASN.1: Add helper functions for recognizing tag values
9bf4c0539 ASN.1: Verify that NULL value has zero length
f629bfe22 ASN.1: Add helper functions for debug printing identifier/length info
429f725d9 ASN.1: Define tag value for TIME
4481b03ee ASN.1: Fix a typo in a not-used tag name
2f2a57075 nl80211: Restore station mode on deinit only if station when started
a746393dc TWT: Allow specifying Control field value in TWT Request
a6b2007c2 nl80211: Support disabling HE in infrastructure BSS as station
01f2e54ce P2P: Clear pending_listen_freq when stopping listen
82a348eda wpa_supplicant: Don't process EAPOL frames while disconnecting
e80e6a2f1 eapol_test: Add address family for IPv4 in Windows build
cd2f8151e Add support to return bandwidth for channel 2 of the 6 GHz band
6b4e32da8 New vendor attribute to configure TWT mantissa in microseconds
7fd2f2496 TWT: Support sending TWT Setup and Teardown Action frames
edbaffc4f wpabuf: Add helper functions for writing 64-bit integers
17d85158c Fix hostapd PMKSA_ADD with Authenticator disabled
147d6d372 Update VHT capabilities info on channel switch event
dc587c479 nl80211: Determine secondary channel offset for CS to 80+80 MHz
0a8095d72 nl80211: Debug print for channel switch request parameters
a20ace3a1 nl80211: Add command-to-string mapping for previously missed commands
0f37b8142 More specific set_freq_params debug prints for 80/80+80 MHz errors
ab8929192 nl80211: Use process_bss_event() for the nl_connect handler
7c5442e74 DPP: Clear hapd->gas pointer on deinit
076e0abdd SQLite: Fix temporary eap_user data freeing on interface restart
2da3105ac Fix use after free with hapd->time_adv on interface restart
5ac977758 Reject authentication start during explicit roam requests
800fb6997 QCA vendor attribute to allow 6 GHz connection with all security types
1a60099f2 QCA vendor attribute to ignore SAE H2E requirement mismatch
e9d598d8a Update old link to ACS wiki documentation
b5e3d92ee OCV: Fix OCV-FAILURE event address for FT Reassociation Response frame
40551a15c Fix a memory leak in WPS with ap_scan=2
900adb3c9 FILS: Simplify code paths
4a5f6e88b SAE: Use more explicit IE payload validation steps
57fec19da Use more consistent iface->conf checks
b8211e1e7 PASN: Avoid unreachable code with CONFIG_NO_RADIUS
9a1136b7f FILS: Fix RSN info in FD frame for no-group-addressed
6035969e0 Fix dynamic EAP library building
a826ff2d9 Ignore group-addressed SA Query frames
d314213f6 P2P: Pick a 5 GHz channel from more possible channels
205c35cef nl80211: Allow compilation with both vendor do_acs() handlers
61a258e78 nl80211: Add ACS support for Broadcom device
827b43b3c RADIUS client: Support SO_BINDTODEVICE
3a05f89ed Android: Add DRIVER command support on hostapd and hostapd_cli
50baf345b TDLS: Support TDLS operations in HE mode
184c82468 P2P: Add device address to the debug entry on oldest peer removal
8460e3230 P2P: Fix a corner case in peer addition based on PD Request

Change-Id: Ieec0678b1a5c72fef3f3363cb54b20ac1cb8ab7f