Bug: 247537570
Change-Id: I6277dd3637721bf16dca78dbe3b591dbdd75bb95

TEST:Generate factory images

BUG: 217478568
Change-Id: I5736096c4af6e46058e9a3ef4bd48acac4b8e701

[Change list]
1. fix AMS mistriggering problem in SU0

Bug: 241723468
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I367166a0637e0071a1ef16f654f4b74bc0408854

Bug: 243005982
Change-Id: I7b6c5cf0a62e3f7b8a459adc94501313e11d648a
Signed-off-by: Cyan Hsieh <cyanhsieh@google.com>

This reverts commit 7e2cc1eb.

Reason for revert: Move throttling back to userspace
Bug: 239887528
Signed-off-by: George Lee <geolee@google.com>

Change-Id: I4ef3851a7163e50ed95862ba99330046634e032c

Update for JP SAR values.

Bug: 233569849
Test: visual
Change-Id: I525ecb9f8b7ecce407db1e00f2dbaf7919b742af

Instead of using hard-coded GPU freq, tune
DVFS period instead.

Test: Boot
Bug: 239887528
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I53415fb5c5390adace99b593495c6388b3232cd0

Bug: 241526192
Test: confirm config is correct
Change-Id: I89aacf0659a9205665d5017f5f0bc25b2322698c

Bug: 240743392
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I53156f61f3cb3e00be888ab29079babc4c12a7e8

* set BtBqrEventMaskOverride value to 262238 in bt_vendor_overlay.conf
  to disable firmware BTRT logging.

Bug: 237906721
Test: Manually
Change-Id: Ic509d750dcbbd8089df73c454d29f40bfe433716

Test: manual - check cpu frequency is set correctly when triggering
powerhints.

Bug: 239625337
Change-Id: I74651043ad6d84fe3a63627ce6ad0dcc7f38860a

Bug: 209525694
Signed-off-by: Sam Ou <samou@google.com>
Change-Id: Ie685e86feeb0ed3719b5cdebccd0a2218e2a2a6d
(cherry picked from commit 8d5dc506)

So that the mm conversion is less than 1.

Also update missing config auth_ripple_alpha_in_duration
which should have been migrated to be 0 since the device
supports UDFPS.

Test: manual
Bug: 237311757
Change-Id: Ia0ba3145250ea16e58803651d77471f9c701b444

1. HA Generic/TMOUS AMS fine tuning for DT
2. HA Generic/TMOUS BVE fine tuning
3. HH TX TDC fine tuning
4. Align same parameter : Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX

Bug: 239784758
Test: Verified at b/239784758#comment4
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Icaea25d152cdb9dadac04714b14b184ef918543b

Bug: 239368308
Test: Camera CTS
Change-Id: I2d8159b2b9d7d0d427b291efea2030f66c6fb536

Change list:
  1. Merely one change:  change AGC param(rmsTav) from
     200 to 1000
Bug: 239342425
Test: Verified at b/239342425#comment9
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I90a16f61ac063833af413c4daf3703289d67ae06

Bug: 216312292
Change-Id: Iad084514aa4ae580d9356fd6c2da4b8b9db0fef6

This reverts commit 5b8dbb54.

Reason for revert: b/238852060 and b/238284104)

Bug: 238852060

Change-Id: I0aa5910f7047d3f710cbb3f2538330454ba370f4

Update C10 VIRTUAL-SKIN-CPU-GPU thresholds

Bug: 230644885
Test: Build and boot on device.
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I9316de24d69c3717e35d77c9318cc3a57389bb46

Update usbc overheat mitigation thresholds for UI

Bug: 222577017
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ica73dfdb9795db09026822a0fee6048daacc439f

This is part of the change to move the throttling mechanism into kernel
space for faster response time.

Bug: 238555356
Test: Confirm kernel space throttling
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I681ad03f5165af00b7db00251e03abeccebdb0cc

Bug:238680468
Test: manual test (b/238680468#comment8)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I9ca63593e5ea4a34b83a429815ac006bfb99f474

Bug:238680468
Test: manual test (b/238680468#comment8)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I544375dfba2fee42c0b24242f0817fb3354d69e3

Bug: 238403490
Test: manual test (b/238403490#comment4)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ib78388a74ba36239bded6dbfe73168c9c2db9daa

Bug: 238931611
Validity test: 239117198
Test: Gnss Sanity test
Change-Id: If6df6a0a47ecf4f58f634378f8998a78385107fd

This CL sets the MIF min clock frequency to 1539MHz, which based on
initial ODPM and MIPS measurements shows benefit both in terms of power
consumption and cycles-per-instructions (CPI), reducing the gap with R4
device.

Bug: 238775955
Test: ODPM and CPI tests. Link to test results provided in the bug.
Change-Id: I6fc043c3d0d9f052c02dd04eb47f22661cfade6a

* remove the BTRT logging to advoid Umimplemeted packet type issue
  happening

Bug: 237906721
Test: Manually

Change-Id: I6d2b1444800f7955dc26714d108152cb4abb2114

Bug: 238435115
Test: Boot and verify settings
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Iebf1682246f736ef7cec1796e4dd7539315ee8bc

Source: https://docs.google.com/spreadsheets/d/1KsOXacU5Q-R04Xa7jBRvNJPdeCfVJp_ldeqgeB_Prxs

Bug: 206984074
Test: Manual HW Lab Tests
Change-Id: Ic82041bba11858e44190d836d818d00fb48bcbf8

Bug: 233569849
Test: visual
Change-Id: I380581371ab6c5b6c973f8be3fe42cdffbeb0283

Update persist file permissions on boot to
correct inconsistent output at factory.

Bug: 238045555
Change-Id: I5425bd7affe767c616c616c5c2f65aef9b78ef6b

Bug: 236709186
Test: dumpsys vibrator_manager
Change-Id: I23cf1e7dab264448dd0675bb1939135ae0cacd02

Bug: 233619860
Bug: 237485063
Test: build pass on both cheetah and aosp_cheetah
Signed-off-by: Rex Lin <rexcylin@google.com>
Change-Id: Ic759b1efc206a3c1e68526098d258f2c142c6799

This reverts commit 915bde6f.

Reason for revert: Fix build breakage

Bug: 237485063
Bug: 233619860
Change-Id: I3ad1dc034e2e4c699f9b32e79c40aa257bf19914

Bug: 222577017
Test: Verified by emul_temp
06-28 14:33:25.423 I/pixel-thermal( 6959): usb_pwr_therm: 37
06-28 14:33:25.424 I/pixel-thermal( 6959): USB-MINUS-USB2: 8.456
06-28 14:33:25.425 I/pixel-thermal( 6959): USB-MINUS-NEUTRAL: 7.676

Change-Id: I13a13aa4df7d68946ed0aab7937495b5b5365704

Bug: 233619860
Test: build pass
Signed-off-by: Rex Lin <rexcylin@google.com>
Change-Id: Iee42962bb19026a5c10f6bb74f723694da27ab76

Given that PTS-Thermal fix for Monitored tzones and TRIP_DOWN
is enabled.  We can re-enable monitoring of BCL thermal zones.

Bug: 236930961
Test: Boot and confirm settings
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Ic848bff8824d693904e7a575b8679a7e305275b4

1. GPU 202Mhz thermal throttling is too aggressive and cause frame missing. So, adjust the hardlimit and cdev_ceiling to improve perf.

2. Set the cdev_ceiling for CPU to avoid the abnormal throttling request when ODPM has issue.

Bug: 234998975
Test: Confirm fps drop for pip test
Change-Id: I07b58d4e9412e4389bb7e2bb185ea9da0b18cc13

Bug: 236296247
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ib7aa0b9b929978eb24104c79e93290b292454735

- Add script and conf file to generate country conf
- Modify the cal path

Bug: 233619860
Test: Verified with local build on C10
Signed-off-by: Rex Lin <rexcylin@google.com>
Change-Id: I4d480cea4b06f02082c86fbb6d4a0613f8dfb0c2