Test: manual

Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ic796722d5186b2bb354315862892c5640252bf67

Modify name from sysfs_vendor_sched to proc_vendor_sched

Test: without avc denial
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ie8fdb9e6634fb160f5cea64883bead93be13d93e

Add touch module into the init.insmod.xxx.cfg, it will be loaded after
all common modules in late-init. So the touch module won't be loaded in
off-mode-charge.

Bug: 227269826
Bug: 226881266
Test: Verify pass that the touch module is not loaded in off-mode-charge.

Change-Id: I3f3153afb75355020e17534838410050f20f02b2

FM table Changelist:

C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB

Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199

- Create separate powerhint json files for a0 soc
- Add control/switchon powerhints for all IPs
- Change thermal severity level to LIGHT
- Update trip temps as per policy

Bug: 194509203
Test: Build and boot on device. Check change of trip temperatures
after the thermal severity of LIGHT
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ibd19ea16d0fee25dec801b287e1eab05699a8d7f

Bug: 215662726
Test: n/a
Change-Id: I1346de62a2e1425250583d7bc1365ffa72353ee6

Add cold temperature policy to combat sharp SOC% drop

Bug: 223420221
Test: Local peak current shock test at cold temperature
Signed-off-by: George Lee <geolee@google.com>
Change-Id: If1db429a6c6c181735af001a72372f63a59d01c4

There is no swiotlb usage so we can append noforce to
remove 2MB reserved memory.

Bug: 226578178
Test: check total memory and io_tlb_nslabs
Signed-off-by: Martin Liu <liumartin@google.com>
Change-Id: I746e8a1d18d78243bfe6a0b7549d5cf09cc4e227

Due to b/214429812, QURGENT currently is not working properly, and cause
easily see EBUF full when capture on GCA. Temporary increase MIF clock to
mitigate memory interface congestion. We should revert this when
b/214429812 fixed.

Bug: 223734867
Test: P22 GCA capture
Change-Id: I0cc16d5bd83cb23462147c44547077665bc1dc73

Test: Spatialized audio (including headtracking) with Pixel Buds and
multichannel mp4 file playback

Change-Id: I4f216aff07c25f80337ea07470983c4ae1e48efb

Modify the path of vendor_sched nodes

Test: powerhal work normally
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I0f499fac276fbdd3bf965bdd8c81bc4c4e7f48c4

Bug: 193784220
Test: adb shell getprop | grep vibrator
Test: adb shell dumpsys vibrator_manager
Test: adb shell dumpsys android.hardware.vibrator.IVibrator/default
Test: atest VtsHalVibratorTargetTest
Change-Id: I66b109d67400cf6382b23c0969726031d38b2697

Delay between NFC start and kernel has increased
This patchs update this delay to avoid lock at start

Bug: 223228405
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: I1c91c73e420315e67ecfb076f90a0fcc20deb3fe

Update target load due to Pro mid CPU
this hint impact the high streaming use case like 60fps / 120fps and
240fps.

Bug: 222570798

Test:
1080p60 frame drops: 0.3% (before 3%)
slow mo 8x: frame drop 0%. 300mW saving on mem path

GCA test
CTS no regression
Passed:Tests Passed: 358, Failed: 4, Not found: 0, Status unknown: 0

Change-Id: Ie53f6eaadadf3540cf9a7b6cf7b801d46e943098

C10:
zone condition(5 nits, 5 Lux) in 120Hz
P10:
zone1 condition(20 nits) in 90Hz
zone2 condition(25 nits, 20 Lux) in 90Hz

Bug: 220878644
Change-Id: Id8c94230c070812093600f32e7326d8550794f6d

Change List & Tuning Notes
1. Iteration to mitigate the subjective difference between
   2.5A & 1.8A(BAACL throttle) waves tunings.
2. Speaker-safe mode is updated accordingly.

Bug: 203794965
Test: manual test (b/203794965#comment13)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I1a1ebd5a3080c7ea93d5592d82d78533d01103cc

Update C10 and P10 thermal configurations with v4 coefficients

Bug: 223909968
Test: Build and boot on device. Check thermal configuration at
/vendor/etc/thermal_info_config.json
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Iad867590122f5c16667ba020f98799c952b3176c

Test: Verified after face authentication is done, the lockscreen
is not skipped.
Fixes: 219634181

Change-Id: Ife19c5b6ac60c60d6cc6f68f32dc6755426043b0

Bug: 225351394
Test: Verified twoshay not running in charger mode using cereal (P31701277).
Signed-off-by: Mark Chang <changmark@google.com>
Change-Id: Iad139a8340f5a8e6ee53ba434edc3b98379f68e2

Update uclamp_min to keep the little cores boost running on the same
frequenices.

Bug: 220975075
Test: build and boot to home
Change-Id: Idfc12229ec372288c29b61e2d965e13e480476e5

Bug: 197780765
Test: build and test fingerprint on device.
Change-Id: Ia135a56c18a4e9993b05eb93abca2b241764e67b

Add these property for the development on userdebug and eng only on P22.

Test: manual

Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ic80ffbbfdcafda4bba9ed6edf01002d3db7e0c0b

If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == true
use audio_policy_configuration_a2dp_offload_disabled.xml (a2dp X LE X)

If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
(ro.bluetooth.leaudio_offload.supported == false OR persist.bluetooth.leaudio_offload.disabled == true)
use audio_policy_configuration_le_offload_disabled.xml (a2dp O LE X)

If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
ro.bluetooth.leaudio_offload.supported == true AND persist.bluetooth.leaudio_offload.disabled == false
use default audio_policy_configuration.xml (a2dp O LE O)

Note:
The above settings are based on ro.bluetooth.a2dp_offload.supported == true condition
If ro.bluetooth.a2dp_offload.supported == false, the content of the default audio_policy_configuration.xml
file must be replaced by audio_policy_configuration_a2dp_offload_disabled.xml on the target

Test: manual

Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I4a9bd45c1341100217ab32fd81f7421af00e059d

* set SarBackOffHighResolution = true for support power index
  from 0 to 80 for setting backoff in 0.25 dB step

Bug: 170369474
Test: sending sar command with power cap index between 20 ~ 80 and
confirm the SAR backoff is workable.

Change-Id: I56d75abcff55e93554bf656fff164b861fe0e3c2

Bug: 221964481
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I63e7dff97cd48ec337de2f70d2746e28afc19a57

Disable wireless charging during drain, usb charging,
and charger stress test
  - vendor.disable.wlc 1
If device is placed onto dreamliner and shutdwon(drain out),
it would boot up by DC_CHG and keep shutdown(0%)-boot up
(by DC_CHG) continuously. To avoid this symptom, limit wireless
current_max as 75000 after device boot up
  - persist.vendor.limit.wlc.current=1

How to verify:
  adb shell setprop vendor.disable.wlc 1
  adb shell cat /sys/class/power_supply/wireless/online >>>> 0

  adb shell setprop persist.vendor.limit.wlc.current 1
  adb shell cat /sys/class/power_supply/dc/current_max >>>> 75000

Bug: 204211357
Test: set the property manually and query the result from file node.
Change-Id: I3ae2460f964b12924c3432d7f84203e2d802aa5f
Signed-off-by: Ken Tsou <kentsou@google.com>
(synced from commit 6e0bb1cb11b05768d04767e85cd28eaef212f305)

Disable the powerhint for F2FS gc_urgent mode, since we are going to
replace this with the smart idle maintenance service.

Test: turn on/off the screen & check /sys/fs/f2fs/dm-*/gc_urgent
Bug: 214430685
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Change-Id: I3e7fc4efdd6eed0a61fb2cedf3620907fece226d

Bug: 222483102
Test: manual
Change-Id: I16b665f72aae3b7e82c7f46a608eed36bbddae7f

Bug: 222019218
Test: atest AccessibilityFingerprintGestureTest
Change-Id: Ic36efe75a02cb707adc5c9aab10ec8916644c890

Bug: 221964481
Bug: 214337696
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ia6eae5d830b16cfa587b85003cbe968f6061e1b3

Bug: 186585880
Test: Manual Tests
Change-Id: Ife210d69be43587dbeace49764dd07aa83375b9a

- Add label for GFE4J (mmWave-JP) of C10.
- Add label for G03Z5 (Sub6-JP) of P10.

Bug: 213977009
Test: visual
Change-Id: If34fbb37f5269294bd2fd5d599f79d3d1df57cf4

Bug:223341194
Test: manual test (b/223341194#comment8)

Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ib29ce35fd303c8f0cd011363ff3277ef5031dca5

P21 has been using GPU power hold during app launch to mitigate jank
from GPU power on latency.
However this same mechanism seems causing instability (may be related
to the new inter-frame power optimization). While the root cause is
being investigated, disable the boost.

Bug: 223828284
Test: Build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: Id04a1d09ebd5b36c1c7c55824da34bffb6435cab

- Add Doze settings

Test: manual
Bug: 199469793
Bug: 199468273
Change-Id: I05aa9305781539444e37a2e2ae0b05f0c8fbf79a

By increasing hardware clock divider count, we do not need to throttle
as hard to mitigate for brownout.

Bug: 221070649
Test: Local stress test to ensure no brownout.
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I7ced6cdcf215738dd50d527f9f58ae4046492b29

Bug: 221173040
Test: Do FP unlock and confirm the user_vote can be bypassed
Change-Id: I365924ea9f262c563c2c067d9989e3153d2c0c26

FM table Changelist:

1. C10P10 HA optimization tuning for EVT1.1
2. P10 Modify HH volume parameter to fix b/223103615

Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I1dddf764788a44613f2a00c5a0acb703e54ba3b1

Update virtual-skin and virtual-skin-charge with v2 coefficients.

Bug: 220922474
Test: Build and boot on device. Check thermal configuration
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I81224836d03fe501b6472d568e037019c61b7dca
(cherry picked from commit c9f55902)

Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ic8f0e696280c87412f0f52657ae26360f00c29e5